Members Constabulary Posted November 22, 2014 Members Report Posted November 22, 2014 A very good price, I think. 50+(4x1.5)+20=130 mm, so with a little protruding space, let's say 160 mm shaft. Sounds good? Btw, I will order the Jack 750W motor tomorrow. Got the prices - reducer pulley 50mm / 200mm is 50€, the 160mm shaft is 8€ and the 4 adjustment rings are 2€ each. This already includes shipping to my address. Shipping to Norway is extra. I assume weight will be below 1 Kg so registered shipping will be ~10€. So if you or someone else is interested please send me a PM within the next 3-4 days. BTW - I´m not sure if 160mm is enough, don´t forget the width of the flange in your leg... Quote ~ Keep "OLD CAST IRON" alive - it´s worth it ~ Machines in use: - Singer 111G156 - Singer 307G2 - Singer 29K71 - Singer 212G141 - Singer 45D91 - Singer 132K6 - Singer 108W20 - Singer 51WSV2 - Singer 143W2
Members AEH Posted November 22, 2014 Author Members Report Posted November 22, 2014 Got the prices - reducer pulley 50mm / 200mm is 50€, the 160mm shaft is 8€ and the 4 adjustment rings are 2€ each. This already includes shipping to my address. Shipping to Norway is extra. I assume weight will be below 1 Kg so registered shipping will be ~10€. So if you or someone else is interested please send me a PM within the next 3-4 days. BTW - I´m not sure if 160mm is enough, don´t forget the width of the flange in your leg... Sent you a PM Arvid Quote Arvid Hoffarvid@murul.nowww.murul.nowww.arbeidskar.no
Members steadybrook Posted January 9, 2015 Members Report Posted January 9, 2015 Will this type of motor work on a needle / awl machine? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.