Bigpaws Report post Posted November 22, 2014 Hey all, I have a drop down roller guide that I want to attach to my Cobra 18. Question is: Can anyone tell me what the screw size is for the threaded holes as shown by the arrows in the attachment? Thanks, Rick Quote Share this post Link to post Share on other sites
Wizcrafts Report post Posted November 23, 2014 You should ask Cobra Steve what size bolts they're tapped for. He may even have a pair of bolts. Quote Share this post Link to post Share on other sites
Bigpaws Report post Posted November 24, 2014 Thanks for the response Wizcraft. I have an email in to Steve, but it'll be tomorrow before he sees it. I figured the holes could be either metric, Singer, or even SAE......better to know for sure than to bugger things up! Thanks again Wiz......I've read pretty much everything you and others have posted about sewing machines here on LW, and can't thank you enough for your wise council and advice. You've saved many of us from the heartache of misguided purchases (those that listen anyway). Your experience is invaluable and always on the mark. I don't post all that often, and just wanted to express my appreciation for your guidance and information. Regards, Rick Quote Share this post Link to post Share on other sites
CowboyBob Report post Posted November 24, 2014 It is metric M6x14 Quote Share this post Link to post Share on other sites
Bigpaws Report post Posted November 24, 2014 Thank you Bob....that makes things easy! Do you happen to stock (or know where to get) a drop down guide for 441 clones (Cobra 4 specifically, if that matters)? Rick Quote Share this post Link to post Share on other sites
CowboyBob Report post Posted November 24, 2014 Yes,we have them but you will have to drill & tap 2-holes to mount it.There is no template either,so you have to line it up, hold it where it mounts & mark it & drill & tap. Quote Share this post Link to post Share on other sites
