tossik Report post Posted March 19, 2015 Hey guys, me again My search continues for a sewing machine, and I just stumbled on a Juki DNU-241HS (see pictures). The seller is selling head and table. Should in in great working condition. They are asking $500 for it. Is it worth it? Any insight on the machine? I figure it would be good for lighter work (belts, wallets, canvas). Then I would get a cylinder machine for heavier bags and such. Your guy's advice is as always appreciated! Quote Share this post Link to post Share on other sites
CowboyBob Report post Posted March 19, 2015 Yes,this should be a good machine for you you might want to upgrade with a servo. Quote Share this post Link to post Share on other sites
Tejas Report post Posted March 19, 2015 The Juki Juki DNU-241H is the same machine as the Nakajima 280L which I think was bought out by Juki. I think I recall reading somewhere that all the parts are still available but the most likely needing replacement are. Here is a link to the manual. http://raichert.com/adobe/dnubook.pdf Quote Share this post Link to post Share on other sites
tossik Report post Posted March 20, 2015 I am driving to go look at it, wha servo would you recommend for this machine? Quote Share this post Link to post Share on other sites
elwind Report post Posted May 2, 2024 My mother-in-law has a Juki DNU-241HS which is what you claim to be the same as the Nakajima 280L. The link you've provided above no longer goes anywhere. I was wondering if you could provide a link or any additional information on these particular machines. Specifically, she is looking for a thread tension guard plate and screw. Quote Share this post Link to post Share on other sites
