Chinese Shoe Patcher, Parts And Instructions

[Frodo]

 Edited you take  anything apart

turn the crank so that the handle is in the 12 o’clock position

take a picture of the orientation of the  2 cams  in relation to the 12 o’clock handle

this picture wil be of help at a later time . At the same time

open  the bobbin door and take a picture of the orientation of the bobbin carrier hook in relation with the needle while the handle on the crank is at 12 oclock

Just now, Frodo said:

 Before you take  anything apart

turn the crank so that the handle is in the 12 o’clock position

take a picture of the orientation of the  2 cams  in relation to the 12 o’clock handle

this picture wil be of help at a later time .
At the same time

open  the bobbin door and take a picture of the orientation of the bobbin carrier hook in relation with the needle while the handle on the crank is at 12 oclock

 

[ZARDOZ the GREAT]

On 9/26/2023 at 11:08 AM, KenH said:

I found this manual that seems like it might be a good manual at https://www.scribd.com/document/486330576/China-patcher-users-manual71719-pdf

I setup an acct (free), uploaded a different manual and it allowed me to download China Patcher Users Manual71719 PDF 13 page manual.  Just glancing at the manual it seems like it might be the best around.  I also have a pdf copy of the manual that comes with the machine - as you'd expect it's a poor manual.

Since you're new to the machine you might like to look at the facebook group for the machine - it's active and some good folks to help.

https://www.facebook.com/groups/1646031288779869/questions

I sure wish they'd move the group form FB to a real forum - that would be MUCH easier to read, and find old posts.

I just realized I could attach a file - so it's attached and you don't have to fool with the scribd place.

Ken H>

 

 

China-patcher-users-manual.pdf 544 kB · 7 downloads

Sorry I took so long to reply... life!

 

Thank you very much for that manual!!!

On 9/26/2023 at 12:17 PM, chuck123wapati said:

plus there are tons of you tubes on it as well as quite a few here use them so if you have questions ask.

Thank you!

On 9/26/2023 at 11:01 PM, Burkhardt said:

As @Frodo said, that's the guy that I got all the adjustments from, but in order for anything to work that was my biggest frustration from the start was taking the hook and bottom carrier out and getting all the black crap off it. You'll never get it to work till it's sanded and buffed completely smooth. @chuck123wapati is the latest to get one working so plenty of people here got one and have gone through everything to get working

Thanks!

[ZARDOZ the GREAT]

On 9/27/2023 at 1:41 AM, Frodo said:

 Edited you take  anything apart

turn the crank so that the handle is in the 12 o’clock position

take a picture of the orientation of the  2 cams  in relation to the 12 o’clock handle

this picture wil be of help at a later time . At the same time

open  the bobbin door and take a picture of the orientation of the bobbin carrier hook in relation with the needle while the handle on the crank is at 12 oclock

 

OK

Thank you!