Members Mariohanel Posted June 13, 2015 Members Report Posted June 13, 2015 I have a restored Pearson #6 for sale, it's been converted to a 220v enduro servo I have all the parts to convert it back to a treadle also comes with a bobbin winder. Located in Lakeview Or., any questions please call Mario at 530-260-0770. Price 4500$.
Members Mariohanel Posted November 24, 2015 Author Members Report Posted November 24, 2015 I would consider partial trade on a 111w155 or 144w103 (head only), I am also open to reasonable offers. Thanks, Mario
Members Mariohanel Posted November 24, 2015 Author Members Report Posted November 24, 2015 Hi BigMatt, sorry about your neck, your work is very clean. Thanks for looking Mario
Members imstephenjones Posted December 7, 2015 Members Report Posted December 7, 2015 BigMatt, My neck hurts too. Wish there was a rotate function on this forum. MarioHanel, Beautiful machine. Someday!!
Members Mariohanel Posted December 8, 2015 Author Members Report Posted December 8, 2015 imstephenjones, appreciate the compliment. Thanks for looking, Mario.
Members Mariohanel Posted December 20, 2015 Author Members Report Posted December 20, 2015 I thought I would add some photos of the chap table a friend made out of solid oak for the #6. Thanks for looking Mario.
Members Constabulary Posted December 27, 2015 Members Report Posted December 27, 2015 Maybe you should add a video showing the machine in use. This may attract some potential customers. Just an idea.
Members Mariohanel Posted December 29, 2015 Author Members Report Posted December 29, 2015 Go to Hanel's Saddle Shop on Facebook for a short video. Thanks Mario.
Members Mariohanel Posted April 8, 2016 Author Members Report Posted April 8, 2016 I have lowered my price to $ 4400 on this machine.
Members Mariohanel Posted January 18, 2017 Author Members Report Posted January 18, 2017 Lower price to $4300
Members Mariohanel Posted May 10, 2018 Author Members Report Posted May 10, 2018 I have lowered my price to $4100 with the conversion and $3800 put back to its original state as a treadle, I am also open to partial trades. This machine has been completely gone through and has had most all of the replaceable parts replaced so it is in top notch condition and it makes a gorges looking stitch.
ljk Posted May 10, 2018 Report Posted May 10, 2018 Hello I do have a 144w103 in Colorado, have some history. Also have a 111w155 in Florida that was the crinkle 50sh paint. Excellent original condition. tx Lynn
Members Mariohanel Posted May 11, 2018 Author Members Report Posted May 11, 2018 Hi ljk, I forgot that I had those machines up there I have since found a machine for that spot in the shop, I would be more interested in a Adler or pfaff cylinder arm, I prefer Adler not shur on all the models, like a 269 or something similar, or another needle awl machine. Thanks for your interest Mario.
Members Mariohanel Posted January 26, 2019 Author Members Report Posted January 26, 2019 This machine has been sold.
Recommended Posts