Contributing Member JLSleather Posted August 28, 2015 Contributing Member Report Posted August 28, 2015 Is there a 'dummy' for the OLD model super blackhawk .44mag? 7.5" barrel but that's less critical. Quote
Members chiefjason Posted August 28, 2015 Members Report Posted August 28, 2015 Have you checked Duncan's? They have some odd ones. Quote
Contributing Member JLSleather Posted August 28, 2015 Author Contributing Member Report Posted August 28, 2015 Gonna call em today -- I'll let ya know if they got one. Quote
Members camano ridge Posted August 28, 2015 Members Report Posted August 28, 2015 (edited) Bunkhouse Tool Co has a 7.5" Super Blackhawk. I don't remember if it is old or new. I talked to them about it sometime ago. http://www.shop.bunkhousetools.com/Super-Blackhawk-75-HM940.htm Can't tell from the picture if there are two screws or three screws on the side plate. (3 screws old Mod) Edited August 28, 2015 by camano ridge Quote
Contributing Member JLSleather Posted August 28, 2015 Author Contributing Member Report Posted August 28, 2015 Not sure how I missed that! I was going to call Ray today anyway Quote
Members camano ridge Posted August 28, 2015 Members Report Posted August 28, 2015 (edited) I am pretty sure it will work for old or new. I believe on the Super Blackhawk the primary differences are the safety, the old model was recommended to be carried five rounds with hammer over empty cylinder, two screws on the new as opposed to three on the old and some changes around the rear sight. Edited August 28, 2015 by camano ridge Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.