Members penguineer Posted September 29, 2015 Members Report Posted September 29, 2015 Thought I may as well post something up. This is one of the belt buckles I've carved and made up recently. The grey cardboard is to illustrate a 2" belt..... Stitching isn't perfect on the back. I've covered the hook part of the buckle with heat shrink tubing so it doesn't rub as much and has a bit of body. Cheers! Quote
Members Windrider30 Posted September 29, 2015 Members Report Posted September 29, 2015 I like it! Quote
Members penguineer Posted September 29, 2015 Author Members Report Posted September 29, 2015 I like it! Thanks! The shape of the knot design works better on the usual oval buckles: Cheers! Quote
Members Rohn Posted September 29, 2015 Members Report Posted September 29, 2015 That is a great looking buckle. Using that heat shrink is a pretty good idea. Quote
Members penguineer Posted September 29, 2015 Author Members Report Posted September 29, 2015 That is a great looking buckle. Using that heat shrink is a pretty good idea. Thanks! I don't use it on the oval blanks as they have a wider hook. I cut the end of the heat shrink so it laid down against the metal, shrunk it, did a second layer of shrink, then did the lining on the back. The shrink ends up locked between the blank and the back lining. It's actually the first of those large buckles I've made.... Cheers! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.