Keebz Report post Posted October 15, 2015 Hi I'm about to start doing a couple vest for some family members using the Tandly leather vest pattern, my question is on the instruction it says "Be sure to allow at least 1/4"-1/2" extra on all edges to turn the leather for a finished edge..." so my question is does this mean for me to cut a half inch extra all the way around the pattern? or is the 1/4"-1/2" already included in the pattern? Quote Share this post Link to post Share on other sites
DoubleC Report post Posted October 15, 2015 I've never used a tandy pattern but to be sure I'd call them. Also if 1/4" is gonna make a difference in fit I don't think I'd make it Cheryl Quote Share this post Link to post Share on other sites
Northmount Report post Posted October 16, 2015 You have a choice, raw edges, or add extra to all outside edges to allow for turned edges. Tom Quote Share this post Link to post Share on other sites
Keebz Report post Posted October 16, 2015 ok thank you Quote Share this post Link to post Share on other sites
