Members tclaridge Posted December 11, 2015 Members Report Posted December 11, 2015 Here is my first revolver holster- a gift for my Dad. He likes to inlay a Montana coin in his woodworking projects, so I thought I'd do the same for his holster. Thanks to everyone here for all the tips I have gleaned over the past months as I've taken up leatherwork. My learning curve has been shortened considerably thanks to all the expertise offered here. What a great community! God bless, Tanner Quote All the best, Tanner @claridge_leather (instagram)
Members Greybeard Posted December 11, 2015 Members Report Posted December 11, 2015 Well done! Quote Never Stop Learning..... https://www.facebook.com/Greybeardtc/ https://www.facebook.com/The-Art-of-Being-Me-Richard-Lane-617168155076456/
Members Rohn Posted December 11, 2015 Members Report Posted December 11, 2015 Looks good. Nice work. Quote Rohn(John 8:32) And ye shall know the truth, and the truth shall make you free. (KJV)
Members plinkercases Posted December 11, 2015 Members Report Posted December 11, 2015 Very nice. Good edges and stitch work. Quote "Oh my God....I beseech thee grant me the grace to remain in Thy Presence; and to this end do Thou prosper me with Thy assistance, receive all my works, and possess all my affections" Brother Lawrence c.1614-1691 plinkercases.ca
Members silverbullet Posted December 12, 2015 Members Report Posted December 12, 2015 If it were my present , be tuff to use it I'd want to keep it new to show off. He will love it great job. Quote
Members missiontom Posted December 14, 2015 Members Report Posted December 14, 2015 Awesome looking holster for sure, love the stitched in coin, nice touch... Quote
Members tclaridge Posted December 15, 2015 Author Members Report Posted December 15, 2015 Thanks for the encouragement! Looks like many of you who responded are holster makers-- can I ask how you normally treat the leather in terms of oils, finishes, etc.? I have not oiled the leather at any phase of the project (mostly because I don't have any and I do not want to lose the rigid structure of the holster). I have been using Sno-Seal beeswax and shoe polish, nothing else yet. Do you have recommendations for how to treat it in such a way that will keep the leather in good shape without softening it? Thanks! Tanner Quote All the best, Tanner @claridge_leather (instagram)
Members Rohn Posted December 15, 2015 Members Report Posted December 15, 2015 I treat my holsters with Tan-kote from Fiebings. I usually give the a couple of coats. It give a good looking finish and seems to last a long time too. Quote Rohn(John 8:32) And ye shall know the truth, and the truth shall make you free. (KJV)
Boriqua Posted December 18, 2015 Report Posted December 18, 2015 I use resolene for most of my projects as my finish coat. I usually only add neatsfoot oil when I have used a cut dye for my dying. I have no scientific basis but I figure if I cut my cordovan solvent dye 50% with denatured alcohol then spray the leather good and wet with it and let it dry that I ought to replenish some oil. Could be complete waste of time hoodoo but it makes me feel better. If I use straight dye I usually just finish up with resolene on most things and I have people show me holsters I made 8 yrs ago still going strong. On pieces that I know will spend a great deal of time under heavy field use I offer the neatsfoot/beeswax paste finish and melt it into the surface. Gives a great looking TOUGH long wearing finish. Quote
Members Bolt Vanderhuge Posted January 7, 2016 Members Report Posted January 7, 2016 Very nice work there. Quote
Members PAMuzzle Posted January 8, 2016 Members Report Posted January 8, 2016 (edited) Holster looks great!! Mind if I pick your brain on how you did the coin inlay? I am trying to add two coins (1851 and 1856 large penny) to a belt I am using for a two rig set Edited January 8, 2016 by PAMuzzle Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.