tclaridge Report post Posted December 11, 2015 Here is my first revolver holster- a gift for my Dad. He likes to inlay a Montana coin in his woodworking projects, so I thought I'd do the same for his holster. Thanks to everyone here for all the tips I have gleaned over the past months as I've taken up leatherwork. My learning curve has been shortened considerably thanks to all the expertise offered here. What a great community! God bless, Tanner Quote Share this post Link to post Share on other sites
Greybeard Report post Posted December 11, 2015 Well done! Quote Share this post Link to post Share on other sites
Rohn Report post Posted December 11, 2015 Looks good. Nice work. Quote Share this post Link to post Share on other sites
plinkercases Report post Posted December 11, 2015 Very nice. Good edges and stitch work. Quote Share this post Link to post Share on other sites
Boriqua Report post Posted December 11, 2015 SWEET!!! Quote Share this post Link to post Share on other sites
Jon P Report post Posted December 12, 2015 Awesome work!! Quote Share this post Link to post Share on other sites
silverbullet Report post Posted December 12, 2015 If it were my present , be tuff to use it I'd want to keep it new to show off. He will love it great job. Quote Share this post Link to post Share on other sites
Toney Report post Posted December 12, 2015 Very nice Quote Share this post Link to post Share on other sites
missiontom Report post Posted December 14, 2015 Awesome looking holster for sure, love the stitched in coin, nice touch... Quote Share this post Link to post Share on other sites
tclaridge Report post Posted December 15, 2015 Thanks for the encouragement! Looks like many of you who responded are holster makers-- can I ask how you normally treat the leather in terms of oils, finishes, etc.? I have not oiled the leather at any phase of the project (mostly because I don't have any and I do not want to lose the rigid structure of the holster). I have been using Sno-Seal beeswax and shoe polish, nothing else yet. Do you have recommendations for how to treat it in such a way that will keep the leather in good shape without softening it? Thanks! Tanner Quote Share this post Link to post Share on other sites
Rohn Report post Posted December 15, 2015 I treat my holsters with Tan-kote from Fiebings. I usually give the a couple of coats. It give a good looking finish and seems to last a long time too. Quote Share this post Link to post Share on other sites
Boriqua Report post Posted December 18, 2015 I use resolene for most of my projects as my finish coat. I usually only add neatsfoot oil when I have used a cut dye for my dying. I have no scientific basis but I figure if I cut my cordovan solvent dye 50% with denatured alcohol then spray the leather good and wet with it and let it dry that I ought to replenish some oil. Could be complete waste of time hoodoo but it makes me feel better. If I use straight dye I usually just finish up with resolene on most things and I have people show me holsters I made 8 yrs ago still going strong. On pieces that I know will spend a great deal of time under heavy field use I offer the neatsfoot/beeswax paste finish and melt it into the surface. Gives a great looking TOUGH long wearing finish. Quote Share this post Link to post Share on other sites
Bolt Vanderhuge Report post Posted January 7, 2016 Very nice work there. Quote Share this post Link to post Share on other sites
PAMuzzle Report post Posted January 8, 2016 (edited) Holster looks great!! Mind if I pick your brain on how you did the coin inlay? I am trying to add two coins (1851 and 1856 large penny) to a belt I am using for a two rig set Edited January 8, 2016 by PAMuzzle Quote Share this post Link to post Share on other sites
