Members nategines Posted February 16, 2016 Author Members Report Posted February 16, 2016 Jimi, The image that you just sent is the kind of binder I have. Looks like I will just need to get a new foot and cut it off to make it fit. Thanks for the photo I wasn't sure how to even attach it. Thanks for all the help! I need all I can I get. Quote
Members jimi Posted February 19, 2016 Members Report Posted February 19, 2016 (edited) No Problem, just a quick update on the binder. i have just made a new needle plate and as i imagined this one looks as if it will work better although i have to try it out a bit more. you can see in the picture that the feed dog does not feed on the binding as now it only has the left row of teeth feeding. i did not find this information from the groups of accesories in the parts book for the 45k21,25 etc.. the only needle plate for the 45k21,25 etc with a single row of teeth to the left has a knife setup with it. so this needle plate is not present in the parts book?? there is only the right hand one?? although i supose on a tight corner it might touch the binding ?? not sure. now i will finish the plate and try another run. Edited February 19, 2016 by jimi Quote
Members jimi Posted February 20, 2016 Members Report Posted February 20, 2016 sorry nategines, when i said to keep the bottom of the binding up against the foot it dosent, it is the top. there is no guide on the bottom?. Quote
Members RocketDesign Posted February 22, 2016 Members Report Posted February 22, 2016 Wow Jimi! Thanks for all the help! Its very informative. I am going to have a go at it this next week. I don't have all the parts, but I am going to see if I can't find some. Or build some. Quote
Members jimi Posted February 22, 2016 Members Report Posted February 22, 2016 your welcome! remember the parts book had illustrations of the parts full,half and quarter size, so if you have one around with that binder attachment (it comes in almost all of the 45k classes parts books) you could use that as a guide for size. if you need any measurements " just hawler" Quote
Members nycnycdesign Posted August 9, 2016 Members Report Posted August 9, 2016 Just passing along some info although this an old thread. These guys based out of Montreal carry all types of leather binding tape and can split and cut down hides you send them. Waiting on my first order to come in from them but Reuben, the owner, seems like a good guy. http://www.cooper1001.com/language/en/ I'll post an update when I get the binding in but I'm fairly optimistic. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.