Table Edging

[Pintodeluxe]

This is an older post, but an interesting topic.  I did find 1-5/8" wide T-molding at tmolding.com 

Colors available are white or black.

You have to re-rout a centered slot in the table, but that's easy to do if you have a router.  It requires a .080" slot cutter, which is available from Whiteside machine and Amazon etc.  The benefit is that the edging is only 85 cents per foot, with a 5 foot minimum order.  

It might not help you if you only plan on restoring one table, but if you do a couple of projects it quickly pays for itself.  I find a need for t-molding wrapped craft tables and shop fixtures, so for me it was easy to justify a specialty router bit ($10 for the arbor, and $20 for the .080" slot cutter).  

[Rockoboy]

If anybody needs to work (create dust) in a dust-free environment, get somebody to hold the nozzle of a vacuum cleaner right near the router, saw, drill, dremel etc. 

[fredk]

All power tools, except power drills, for the UK market have a vacuum cleaner attachment tube integral with the machine body. But I think its better to have an oppo holding the vac sucker tube near the work

[winxian]

On 2/26/2016 at 11:00 AM, Ole South said:

Does anyone have a source for the T-banding that edges our store-bought tables? You know... the plastic/pvc/rubber strip that protects us from snagging our high-dollar double knit custom designer slacks that we all wear whilst realizing our creative endeavors at the sewing machine?

this have：https://edgebandingmanufacturer.com/product-category/pvc-edge-banding/