Members rosiart Posted June 10, 2016 Members Report Posted June 10, 2016 Thanks for sharing this! Quote Rosemary RosiArt's Blog
Contributing Member JLSleather Posted June 10, 2016 Author Contributing Member Report Posted June 10, 2016 (edited) Welcome. And that's 209.5 x 158.75 to you Re-loading with metric measurements. I'm even going to proof read this time before sending Edited June 10, 2016 by JLSleather Quote "Observation is 9/10 of the law." IF what you do is something that ANYBODY can do, then don't be surprised when ANYBODY does.
Members Miss Denise Posted June 11, 2016 Members Report Posted June 11, 2016 Thank you for sharing all patterns! Quote
Contributing Member JLSleather Posted June 11, 2016 Author Contributing Member Report Posted June 11, 2016 Welcome! More coming soon .... Quote "Observation is 9/10 of the law." IF what you do is something that ANYBODY can do, then don't be surprised when ANYBODY does.
Members Steelhat Posted June 12, 2016 Members Report Posted June 12, 2016 Thanks for the patterns. I got the one for the Pancake style magazine holster for the Glock 17/19 and it fits the mags for my P229 just fine. I printed two sets and modified it via cut and tape to a double mag holster. This is my second piece in leatherwork and the first piece of gun leather. First leatherwork was a field quiver for my son. But the mag holster is really nice, it rides high and hold the mags tight. Quote
Contributing Member JLSleather Posted June 12, 2016 Author Contributing Member Report Posted June 12, 2016 Hi 'n' tight is good... Good to see you fellas gittin' some use outta them! Quote "Observation is 9/10 of the law." IF what you do is something that ANYBODY can do, then don't be surprised when ANYBODY does.
Members Steelhat Posted June 12, 2016 Members Report Posted June 12, 2016 Still need to burnish the edges and finish it up. I'll post a pic when it's all done. Quote
Members Steelhat Posted June 15, 2016 Members Report Posted June 15, 2016 Ok here are the pics, like promised: Quote
Contributing Member JLSleather Posted June 15, 2016 Author Contributing Member Report Posted June 15, 2016 Cool. And you bring up another point about these mag thingies. It looks like you were able to run a stitch up the center and have enough room to separate the mags (some models won't work that way). Was this trial 'n' error, or did you have an old one done that way? Thing is, some folks like a tension screw so they can set the tension themself. But I find one screw between the mags (as you'll see) not so wonderful.. since backing off the tension affects BOTH sides. Some might think that won't matter -- until they try it! When you pull a mag, you change the tension on the OTHER mag..... Ah.. maybe that's another issue Keep 'em comin' .. Quote "Observation is 9/10 of the law." IF what you do is something that ANYBODY can do, then don't be surprised when ANYBODY does.
Members Steelhat Posted June 16, 2016 Members Report Posted June 16, 2016 That was trial and error, but next time I might run two stitches in the middle and leave about 1/8" space in between. It works but they are really close to each other. I think one can also do a triple pouch that way. My next project gonna be a double pouch based on your P938 pouch for my wife's P239 .40 which got also single stack mags. Just need to get me a little drill press first so I can drill the holes for the stitching with a 1/16" bit and get the sanding and burnishing done nicer. Still learning as I go. Made my first pattern for a dual position holster for my P229 also which allows me to carry either cross draw or strong side. Will see how that comes out. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.