Members leatherisfun Posted May 28, 2016 Members Report Posted May 28, 2016 (edited) Juki 1541S with speed reducer and drop down edge guide. Sews up to #138 thread and about 6 layers of 5 oz leather. I'm including left and right zipper feet; binder foot; 1/8, 3/16, 1/4 edge guide feet; 25 bobbins; 15 #18 needles, 100 #20 needles, 13 #22 needles, 49 #23 needles; several cones of thread, #69 and #92. Selling for $1450 I'm located in Longmont, CO. Local pickup or shipping at your cost. Edited May 28, 2016 by leatherisfun
Members leatherisfun Posted June 5, 2016 Author Members Report Posted June 5, 2016 On 5/28/2016 at 5:48 PM, leatherisfun said: Juki 1541S with speed reducer and drop down edge guide. Sews up to #138 thread and about 6 layers of 5 oz leather. I'm including left and right zipper feet; binder foot; 1/8, 3/16, 1/4 edge guide feet; 25 bobbins; 15 #18 needles, 100 #20 needles, 13 #22 needles, 49 #23 needles; several cones of thread, #69 and #92. Selling for $1450, price reduced to $1300 I'm located in Longmont, CO. Local pickup or shipping at your cost.
Mike516 Posted June 5, 2016 Report Posted June 5, 2016 (edited) Just an FYI, I bought this machine for somewhere I think it was around 1400 or 1500 in Philly. I got a warranty and I was able, probably still can, call the guy at the store for help if I had a problem. 1300 still seems a bit high to me being that it's used. That may be why you're having a bit of a hard time selling it. Then again it's only been a week so what do I know. Edited June 5, 2016 by Mike516
Members leatherisfun Posted June 5, 2016 Author Members Report Posted June 5, 2016 They are $1610 at the Keystone sewing site. Mine is just over a year old, it isn't a worn out older machine. I have installed a speed reducer and drop down guide.
Mike516 Posted June 6, 2016 Report Posted June 6, 2016 $1610 is with them having to ship it. Keystone is $1485 if you pick it up in store. I would only add the shipping if you have to ship it too. But I'm not looking to argue with you about price. I'm just saying it sounds a little on the high side to me. Once you drive the car off the lot it loses a lot of its value, even if you park it in the driveway.
Members Ken Nelson Posted June 7, 2016 Members Report Posted June 7, 2016 Needles, extra bobbins, Thread extra feet, I think it is very reasonable. Ken
Members leatherisfun Posted June 7, 2016 Author Members Report Posted June 7, 2016 Thanks Ken. I think that Mike lost sight of the extras included.
Mike516 Posted June 7, 2016 Report Posted June 7, 2016 I have this exact machine, so I have no interest other than to offer advice. I'm not trying to insult you or get it for cheap. I was trying to help you sell it. But I don't know everything, so maybe I'm wrong. Kindly disregard my previous posts. Best of luck to you on your sale.
Members Tulsaman Posted June 11, 2016 Members Report Posted June 11, 2016 Clean machine.... limited forum here to sell it... best to reach out on other sales sites as well. Plus not a common item to sell.. limited market.
Recommended Posts