Members thekid77 Posted July 2, 2016 Members Report Posted July 2, 2016 (edited) Hey friends, I make wallets and loveusing vegtan cowhide but the problem is that I have not been able to find it as thin as I like....preferably .8mm or thinner to reduce bulk.... Does anybody know of any leather splitter on the market that will get leather down to .8mm or thinner? Thank you!! Edited July 2, 2016 by thekid77 Quote
Members Matt S Posted July 3, 2016 Members Report Posted July 3, 2016 I've split tooling shoulder down to 0.5mm and a bit less using one of those Cowboy 6" pull splitters. Stretches quite a bit though. A band knife splitter would work better. Quote
Members Norton Custom Leather Posted July 10, 2016 Members Report Posted July 10, 2016 call slc, iv gotten 1mm from them. i do wallets also & it works good. they may have thinner Quote
Members thekid77 Posted July 28, 2016 Author Members Report Posted July 28, 2016 On 7/10/2016 at 11:32 AM, Norton Custom Leather said: call slc, iv gotten 1mm from them. i do wallets also & it works good. they may have thinner Thank you, yes, I've done business w/SLC and have been very happy :D Quote
Members silverwingit Posted July 29, 2016 Members Report Posted July 29, 2016 Kipskin. 2/3 oz. and very smooth. http://www.weaverleathersupply.com/Catalog/ItemContent.aspx?ItemNumber=3804 Michelle Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.