supercub Report post Posted July 8, 2016 I had one last piece of Python skin that was almost big enough for a holster inlay. In order to make it work, I had to shrink the size of the inlay window. I would have liked to do it a little differently, but this is what I ended up with. At least it sorta matches the knife sheath I made a couple of weeks ago. Thanks to JLS for the basic outline, though I modified his pattern to fit the officer's model. Quote Share this post Link to post Share on other sites
JLSleather Report post Posted July 8, 2016 (edited) SHARP! That the 3.5"? I got confused for a minute, reading "officers" and "python", since Colt makes BOTH. I got a piece o' snake left myself. Was gonna do it surrounded in black HO, but now I see how good it looks in that tan color... don't know why I didn't do that before! Edited July 8, 2016 by JLSleather Quote Share this post Link to post Share on other sites
supercub Report post Posted July 8, 2016 Yep, its the 3.5" Officer's Model, albeit heavily modified. Sorry for the confusion on 'Python'. I realized it would be confusing right after I posted. This one is based on your Commander holster pattern ( cut down a bit), thanks. Quote Share this post Link to post Share on other sites
dikman Report post Posted July 8, 2016 If you hadn't said that you had to shrink the inlay window I'd never have known! It looks like it was designed that way, looks great. Quote Share this post Link to post Share on other sites
