Members Red Cent Posted August 30, 2016 Members Report Posted August 30, 2016 Some people are turned off a little by the looks of the aluminum gun. It is not as "neat" and clean/detailed as the blue gun. You can see where an employee has taken a sander/grinder to certain spots to remove mold marks or a bump. Dimensionally, they are as good as the blue gun. And JSL's point about retention is a good one. I have a few of the aluminum ones. . Quote https://www.facebook.com/redcentcustomleather?ref=bookmarks http://www.redcentcustomleather.com/
Members CaptQuirk Posted August 30, 2016 Author Members Report Posted August 30, 2016 @Red Cent- Thanks for the review, but its a little late, as I had to make a judgement call and went blue. I could not really find anything on their site, as it looks like it was half done, under construction. I found one site that had some negative comments about the aluminum gun, and took the chance on BlueGun. I also had some concern about how they looked, and worried it might not be as accurate based on that too. Maybe next time, the site will be up and I'll give them a try. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.