Members jrny4wrd Posted September 24, 2016 Members Report Posted September 24, 2016 Now I know there been a few posts on holes but I may be blind, or not seen one on the buckles with the pegs that have a little ball on the end. From what I can see is there are 2 main type belts. Ones with tongues (common in stores) and ones with the studs that go into the hole. The ones with the studs in turn have 2 type. A hook and a ball. What type of hole would I make for the one with the ball? A circular with a small cut in the side? Quote
RockyAussie Posted September 24, 2016 Report Posted September 24, 2016 No. Not with a slot. It is best to use a hole that fits a little tightly with the ball. If the leg that the ball is on the end of angles back a fair way they are not to big a problem but if straight, make the hole quite tight. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.