Uberti .45LC El Patron holster molds?

[CaptQuirk]

I haven't found anything close to it yet. Is there a Blue Gun, or other make that will work?

[glockanator]

Have you tried Bunkhouse?

[CaptQuirk]

Just did, thanks. Not a place I've shopped before, and while they don't hve the specific model, I should be able to get by with a large caliber S.A. Thanks for the point out.

[Dwight]

On 10/1/2016 at 9:00 PM, CaptQuirk said:

I haven't found anything close to it yet. Is there a Blue Gun, or other make that will work?

Hey, Capt, . . .  just a small warning, . . . you might want to take a set of calipers to whatever other SAA you want to use for the mold.

Colt, Beretta, and some others are one size, . . . Ruger is a different size, . . . and it is sufficiently bigger that it can (and has, . . . ugh !!!! ) make a difference in the holster. 

The Ruger is a tad bigger overall, and the cylinder is a lot thicker.

Just do the measurement and you should be good.

May God bless,

Dwight

[JLSleather]

On 10/1/2016 at 10:27 PM, glockanator said:

Have you tried Bunkhouse?

Very easy to deal with the folks down there.  Good products, fair shipping (charges and shipping time), friendly service.

 

[CaptQuirk]

@Dwight- Thanks, that had occurred to me, but I wasn't sure. They have some other models at Bunkhouse, but the pistol in question has a 5 1/2" barrel, limiting my selection a bit. Not really, of course, since I can just draw the holster down a bit more than the mold. Either way, it looks like they are the only source for a 6 gun.

[HawkCreek]

On October 5, 2016 at 6:06 AM, Dwight said:

Hey, Capt, . . .  just a small warning, . . . you might want to take a set of calipers to whatever other SAA you want to use for the mold.

Colt, Beretta, and some others are one size, . . . Ruger is a different size, . . . and it is sufficiently bigger that it can (and has, . . . ugh !!!! ) make a difference in the holster. 

The Ruger is a tad bigger overall, and the cylinder is a lot thicker.

Just do the measurement and you should be good.

May God bless,

Dwight

 

Ruger made two different frame sizes of Vaquero pistols. Here's an article with a handy graph that shows the differences in cylinder length and diameter. Unfortunately I haven't found any similar graphs for frame length and widths.

http://www.gunblast.com/Ruger-NewVaquero.htm