Members myjtp Posted December 10, 2016 Members Report Posted December 10, 2016 Was thinking about getting a leather splitter and just saw in my inbox Tandy has their high tech leather splitter on sale for $129 is it worth it for doing belts and straps for the price? Or would another machine be better for the price ? https://www.tandyleather.com/en/product/craftool-high-tech-leather-splitter thanks! Quote
Members Sonydaze Posted December 10, 2016 Members Report Posted December 10, 2016 $129 is a low price for a splitter. I haven't used this model but I had their better one and didn't like it. It is doubtful that it will be sharp out of the box, plan on doing a serious sharpening before you can use it. The width of it is ok for belts and straps but will limit you on doing some other things. Quote
bikermutt07 Posted December 10, 2016 Report Posted December 10, 2016 I would bet a pinky toe that it will need sharpening out of the box. But we should all learn to sharpen stuff. At that price I would try it. It won't get any cheaper. Quote
Members OLDNSLOW Posted December 11, 2016 Members Report Posted December 11, 2016 If you are looking to skiving belt ends it is ok, but as those above have said you'll need to keep a strop handy to strop the blade after a few belt ends. I do have one and I think it is the same as that one, if your lookin at splitting leather after a just a few, no more than 4,5 you will definitely need to sharpen the blade, one thing that can help to make it last is to not use the same area of the blade, keep moving around so the blade will last a little longer. Quote
Contributing Member 24VOLTS Posted December 13, 2016 Contributing Member Report Posted December 13, 2016 I have one. I use it all the time. It Is sharp out of the box. I have not had to strop or sharpen the blade yet. It has a basic blade that is easy to sharpen or have a saw filer sharpen for you. For the price it is good entry level skiver. My recommendation is on the adjustment screw that you put a indicator marking on it so that you know how far you are adjusting the rollers. I did had a wood handle for easier opening. Other then that I have no complaints. Overall good unit. Quote
bikermutt07 Posted December 14, 2016 Report Posted December 14, 2016 Guess I owe somebody a pinky toe. Quote
Members Bolt Vanderhuge Posted December 14, 2016 Members Report Posted December 14, 2016 I have this one too. It was sharp out of the box. I do wish the wider ones were not so expensive though. Sometimes I like to make holsters with full exotic outsides. These are always wider than 4". Quote
Members Powerband Posted November 28, 2021 Members Report Posted November 28, 2021 Can you use this unit to skive 4-inch gussets? Quote
Members Tugadude Posted November 28, 2021 Members Report Posted November 28, 2021 (edited) 3 hours ago, Powerband said: Can you use this unit to skive 4-inch gussets? This one is spendier, but will do the job. 5 1/2" wide leather. https://tandyleather.com/products/deluxe-leather-splitter?_pos=6&_sid=e213dcde5&_ss=r This one from Springfield Leather is around 2 bills... https://www.springfieldleather.com/Splitter-Bench Edited November 28, 2021 by Tugadude Quote
Members Powerband Posted November 29, 2021 Members Report Posted November 29, 2021 Thank you, Tugadude. Anyone tried around four inches with the Tandy unit? Quote
Doc Reaper Posted January 6, 2022 Report Posted January 6, 2022 On 11/29/2021 at 5:57 PM, Powerband said: Thank you, Tugadude. Anyone tried around four inches with the Tandy unit? I have the Tandy one (it was a bit overpriced at time of purchase) and does what I need it to do, sharpening tips on the blade would be helpful, PM me Quote
Members jcuk Posted January 6, 2022 Members Report Posted January 6, 2022 15 minutes ago, Doc Reaper said: I have the Tandy one (it was a bit overpriced at time of purchase) and does what I need it to do, sharpening tips on the blade would be helpful, PM me I know this is for a Osborne 84 splitter but the method will be pretty much the same just to add more often than not give it a good strop every now and then it will help keep it in good working order meaning less time spent on sharpening, a good polished blade works a lot better. This method is pretty much the same way as i sharpen both my splitter blades. Help this helps JCUK Quote
Members Chakotay Posted January 11, 2022 Members Report Posted January 11, 2022 On 1/6/2022 at 8:00 AM, Doc Reaper said: I have the Tandy one (it was a bit overpriced at time of purchase) and does what I need it to do, sharpening tips on the blade would be helpful, PM me goes into sharpening the blade at the end: Quote
Members jcuk Posted January 11, 2022 Members Report Posted January 11, 2022 On 1/6/2022 at 2:00 PM, Doc Reaper said: I have the Tandy one (it was a bit overpriced at time of purchase) and does what I need it to do, sharpening tips on the blade would be helpful, PM me Sorry just seen i did not add the link. https://www.youtube.com/watch?v=7uUvErBUG68 Hope this helps JCUK Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.