Members TomG Posted January 18, 2017 Members Report Posted January 18, 2017 I picked up this Craftaid today and in my opinion, it's a great aid. I haven't worked with it but a short time, and noticed a couple of issues. 1) For best results, make sure that the stamp you are using is sized so that the ends do not overlap and that they don't leave hardly any gap. If they overlap, you get depressions at that point. If they leave too much of a gap, it leaves the grid line visible. 2) Use the lightest impression that you can still see the grid lines. 3) Make sure you have good lighting on all sides of the stamp to help with positioning the 4 points of the tool. Other than this, it seems like a good item to have in your tool bag. Thanks to JLS for the info. Quote Tom Gregory Legacy Leathercraft www.legacyleathercraft.com www.etsy.com/shop/legacyleathercraft
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.