Billsotx Posted February 14, 2017 Report Posted February 14, 2017 Anyone know a source of 8-32 X 1/4 inch, need the head to be about .50 in diameter? These are common on some of the large holster makers products, but I haven't found them on-line or in local stores. Any replies are appreciated. ~Bill Quote
Members Mattsbagger Posted February 14, 2017 Members Report Posted February 14, 2017 (edited) Check knifekits. They have a bunch of holster parts http://www.knifekits.com/vcom/index.php?cPath=41_56_411 Edited February 14, 2017 by Mattsbagger Quote
Billsotx Posted February 16, 2017 Author Report Posted February 16, 2017 Thanks Matt, I appreciate it. Quote
Members Mattsbagger Posted February 16, 2017 Members Report Posted February 16, 2017 No problem. I found some 8/32 are home depot and ran the head around a drum sander for a second and they fit in a line 24 snap. In a pinch it gets the job done. Quote
Members Brianm77 Posted February 16, 2017 Members Report Posted February 16, 2017 Have a look at McMaster-Carr on the internet. Huge selection of hardware (not leatherwork, but hardware in general) Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.