Members Sanch Posted March 26, 2017 Author Members Report Posted March 26, 2017 29 minutes ago, OLDNSLOW said: ya here in Clarksville as well, been thinking about trying to find someone around here to turn one for me. I was thinking some of the gun guys here in town that do gun stuff, or there are a few guys I met a couple of years ago when I was running parts for napa here in town. cool sent you a message check your inbox Quote
Members Sanch Posted March 26, 2017 Author Members Report Posted March 26, 2017 1 hour ago, JLSleather said: Where all the big piles o' leather?@! never stock more than what you can use! it don't make money unless it's moving! plus I have it stored elsewhere for now. I'm still getting the new area together! plenty of storage space under three of the four tabes! Quote
Members KittenThrasher Posted March 26, 2017 Members Report Posted March 26, 2017 Very nice all round, I also like the way you store your tooling stamps, think I might just copy that idea. Quote
garypl Posted March 26, 2017 Report Posted March 26, 2017 I really like your setup! Question about your airbrush station - is it connected to an exhaust fan of some type? I put a furnace filter in front of a box fan when I am spraying small items and it seems to collect all of the overspray pretty well. Quote Cowboy 4500, Consew 206RB-4
Members Sanch Posted March 26, 2017 Author Members Report Posted March 26, 2017 40 minutes ago, garypl said: I really like your setup! Question about your airbrush station - is it connected to an exhaust fan of some type? I put a furnace filter in front of a box fan when I am spraying small items and it seems to collect all of the overspray pretty well. The airbrush station has its own fan it actually pulls through two particulate filters and then through an activated charcoal filter that is two inches thick. I have actually laid fiberglass Micarta inside that station/ Hood and you could not smell any of the fiberglass resin. It is a system that's actually made by Sentry Air Systems Incorporated. I just happened to be at the right place at the right time and was able to acquire it. Quote
garypl Posted March 27, 2017 Report Posted March 27, 2017 It looked like a professional setup, but this is really over the top- very nice! Quote Cowboy 4500, Consew 206RB-4
Members Wedgetail Posted March 27, 2017 Members Report Posted March 27, 2017 Nice workshop! I like your airbrush extractor, mine is the garage door. If the door is open, it's extracting. If it's closed it's not. Lol I basically hold my piece outside and spray it, still wear a respirator though... but it is no good when raining. Haha Quote
Members Hillbilly tim Posted March 27, 2017 Members Report Posted March 27, 2017 8 hours ago, OLDNSLOW said: ya here in Clarksville as well, been thinking about trying to find someone around here to turn one for me. I was thinking some of the gun guys here in town that do gun stuff, or there are a few guys I met a couple of years ago when I was running parts for napa here in town. Im just up the road from both of you on the other side of hoptown a few miles. got kids that live there too. Quote
Members Sanch Posted March 27, 2017 Author Members Report Posted March 27, 2017 18 minutes ago, Hillbilly tim said: Im just up the road from both of you on the other side of hoptown a few miles. got kids that live there too. cool, you anywhere near Elkton? I used to ride out to bike night every Thursday with my Indy. I hope to be doing it again soon I got to get my old Shovelhead back together. Quote
Members Hillbilly tim Posted March 27, 2017 Members Report Posted March 27, 2017 No i'm up hwy109 towards dawson springs. Near the state park. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.