Members pogo Posted March 29, 2017 Members Report Posted March 29, 2017 I'm guessing this question has been asked and answered before but I can't find it, so if anyone could point me to it I'd appreciate it. I'm trying to understand the difference between bonded and non-bonded polyester, and which is best to use in a compound feed machine. I'm running bonded in the needle and unbonded in the bobbin ( because I only have one cone of each) and every so often I get a bird's nest in the lower thread. I'm wondering if it has anything to do with the bonded/nonbonded issue. Thanks Quote
Members brmax Posted March 29, 2017 Members Report Posted March 29, 2017 The bonded would have a coating applied somehow. And as you mention your doing, running bonded topside. This is the design intention to better help in higher tension or stress areas and these type mechanical situations. I believe speed of stitching also plays a big roll here as this can develop heat. A supportive and may well be a sales point. Is some bonding specific applications this is to also add better results to usage of products. Good day Floyd Quote
Members shoepatcher Posted March 29, 2017 Members Report Posted March 29, 2017 Bonding on thread is a clear polyurethane that locks the spun fibers into a much stronger bond for sewing. If you have ever stitched with non-bonded thread, you will know what I mean. No nearly the strength and it frays like crazy. I simply do not use it. Only used in certain applications where the thread might be stronger than the material you are sewing. Trust me, always use bonded thread whenever possible. glenn Quote
Members pogo Posted March 30, 2017 Author Members Report Posted March 30, 2017 Thanks very much. The problem I've been having is excessive fraying of the bottom (unbonded) thread. It seems the message is clear: ante up for another cone of bonded to reload my bobbins and forget the unbonded cone I have. Quote
MADMAX22 Posted March 30, 2017 Report Posted March 30, 2017 Or just take a short break and wind a bunch of bobbins. Quote
Members Gregg From Keystone Sewing Posted March 30, 2017 Members Report Posted March 30, 2017 The ideal is a bonded top needle thread, and soft or non bonded bobbin thread. This helps the bobbin thread come off the spool very smooth and consistently. Quote
MADMAX22 Posted March 30, 2017 Report Posted March 30, 2017 Interesting Gregg I have never heard that recommendation before, also never had a problem with bonded nylon or poly feeding off the bobbin either. Is that more of a high speed cloth manufacturing issue? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.