Juki 241

[Trox]

Hi, a friend has a Juki 241 flatbed (triple feed) sewing machine and he wonder what other newer Juki model that uses the same presser foot. The presser foot looks like the same types used in Pfaff 335, 1254, 345 and so on. And many Singer models, it has that outside foot that goes inside a split presser bar. As you we'll understand he is looking to buy some aftermarket pressers for his machine, like left/right toe and so on. In advance thank you. Tor

[Constabulary]

Since it is a Juki I´m sure it uses Singer 111 type feet

[brmax]

I thought the 1541 juki was based from the earlier 241 type. And my 1541 uses the 111 singer styles. Though many can be purchased i only found factory to be consistently accurate in mounting dimensions.

Floyd

[Uwe]

A simple inquiry to the Oracle on Mount Ebay (a.k.a. search for "Juki 241 feet") reveals listings that suggest that the Juki DNU-241 shares feet with:

ARTISAN : 618-1, 4400RB

BROTHER : B837

CONSEW : 206RB, 225, 226, 226R, 277

JUKI : DNU-241, DNU-1541, LU-562, LU-563, LU-1114, LU1508, LU-1510, LU-1560

MITSUBISHI : DU-100, DU-105, LU2-400, LU2-401

SINGER : 111G, 111W, 153K101, 153W101, 153W103, 168W, 211G, 211U, 211W

TACSEW : T111-155

YAKUMO : 260L

Edited April 1, 2017 by Uwe

[dikman]

The foot on my Pfaff 335 doesn't quite line up with the 111/211 feet, the screw hole is not in the same place. Just so you know.

[Trox]

Thank you all! That's just what I want to hear Uwe, thanks. We are going to order some stuff from Kwokhing. I have their new catalog and there are more stuff there for the Juki machines than online. Nothing for the DNU 241 H machine, but  a lot of stuff for the 15xx series machines. We compared my Pfaff 345 feet and the only thing that did not line up was the screw hole in the outside foot. It affect the height of the foot of course. Again thanks Uwe, very clever searching the Ebay, why didn't I think of that myself