thechavez Report post Posted May 15, 2017 Hi guys- i need some recommendations on a servo motor for my DA 269-373. I have an Enduro Pro 5000rpm on my Consew 206rb, along with a speed reducer. It's a 110v motor, and I'd really like to do something similar on my other machine as well. However, I'm having trouble locating another motor like the one I currently have, so I'm wondering if anyone would recommend others. Or at least which ones to stay away from. I see several models with brakes (as far as I know) floating around eBay for around $100-130, but I'm not sure what to make of them. I also see several that look smaller and have a digital control on the control box that is separate from the motor itself (Iike the Consew CSM1000). Any help on this would be appreciated. Thanks! Quote Share this post Link to post Share on other sites
Hockeymender Report post Posted May 15, 2017 I have an ISM SV-71, and I think it's one of the better offerings out there. They are a little more $ up front, but they are far more controllable thru the interface. I've had several other types of servos over the years but this ISM is by far the best I have used (without going into the really big $$ motors). Mine has a needle positioner and it functions better than the Goldstar motors I'm running with positioners. I like the SV71 so well I plan on replacing all my motors with them over time. Hope this helps (I do not sell these motors or have any affiliation with ISM). Quote Share this post Link to post Share on other sites
Colt W Knight Report post Posted May 15, 2017 In my opinion, I would contact Bob Kovar of Toledo Industrial Sewing and ask him about a FS-550 servo or just tell him what you got and what you want to do, and he can make a different suggestion Quote Share this post Link to post Share on other sites
