Video: Hook Timing Adjustment for Juki TSC-441 class machines (Cowboy CB-4500, Cobra Class 4, TechSew 5100, etc.)

[Gregg From Keystone Sewing]

Second post; this video is flat out AWESOME.  Great job UWE.

[Troy I]

Wow great video... very helpful

[aaronthearcher]

Uwe, 

Amazing and helpful video worked for me had my machine running like a top until last night, not sure what happened but something not good.  broke needle stopped machine dead, thread stuck in race etc.  Now my rear most hook position is almost a quarter of a turn too far back and the rear most movement doesn't align with my 0 degree position,  where is the adjustment for that part of the timing.  I can set the rear most position to the 1mm visible hook but it isn't in time with the correct position of needle or wheel...

[Tim Schroeder]

I thought this was pretty interesting. I admit I'm not the sharpest tool in the shed. I make a lot of those ID 10T errors. This is kinda confusing. 

[Tim Schroeder]

Anybody with a Cowboy 4500 care to post how the Cowboy manual tells you to adjust the hook timing. 

[Cdtaylor]

I can’t begin to tell you how grateful I am for this instruction video!! Thank you so very much! It’s perfect and I will be able to fix it now.