ContactCement Report post Posted July 21, 2017 Affordable quality leather edger right out of the box. When placing the order I knew very little about the manufacturer or how well they would perform. These were reduced and had limited quantities under $10 each with free shipping. The listed or advertised measurements or specifications for the bevelers is accurate. I think some manufacturers have different specifications or ideas about what a defines their #1, #2 or #3 This #2 is much smaller than another #2 I purchased. Material:High carbon steel + solid wood. 135mm,(5.31"） long. Manufacture process: Quenching treatment. Sharp and smooth. No.1 comes with 0.8mm wide bevel, works better for 1.0-2.0mm thick leather (thin) No.2 comes with 1.0mm wide bevel，works better for 1.75-2.65mm thick leather (medium) N0.3 comes with 1.2mm wide bevel, works better for 2.2-3.2mm thick leather (thick) The metal sounds like its tempered (just like other tools in my wood shop) when gently flicking it with a fingernail. The edge beveler does in fact cut veg tan leather right out of the box. The edge beveler arrived faster than expected. The cardboard box described was inside 2 bubble mailers. The edge beveler has a clear tubing to protect the cutting edge and was inside a mini zip lock bag, then packaged in a foam lined rectangular cardboard box with the brand name on it. Quote Share this post Link to post Share on other sites
JD62 Report post Posted July 23, 2017 ????? Brand name, pics, ordering info????? Quote Share this post Link to post Share on other sites
LumpenDoodle2 Report post Posted July 23, 2017 Ditto. Quote Share this post Link to post Share on other sites
Sanch Report post Posted July 24, 2017 On 7/21/2017 at 2:51 PM, ContactCement said: Affordable quality leather edger right out of the box. When placing the order I knew very little about the manufacturer or how well they would perform. These were reduced and had limited quantities under $10 each with free shipping. The listed or advertised measurements or specifications for the bevelers is accurate. I think some manufacturers have different specifications or ideas about what a defines their #1, #2 or #3 This #2 is much smaller than another #2 I purchased. Material:High carbon steel + solid wood. 135mm,(5.31"） long. Manufacture process: Quenching treatment. Sharp and smooth. No.1 comes with 0.8mm wide bevel, works better for 1.0-2.0mm thick leather (thin) No.2 comes with 1.0mm wide bevel，works better for 1.75-2.65mm thick leather (medium) N0.3 comes with 1.2mm wide bevel, works better for 2.2-3.2mm thick leather (thick) The metal sounds like its tempered (just like other tools in my wood shop) when gently flicking it with a fingernail. The edge beveler does in fact cut veg tan leather right out of the box. The edge beveler arrived faster than expected. The cardboard box described was inside 2 bubble mailers. The edge beveler has a clear tubing to protect the cutting edge and was inside a mini zip lock bag, then packaged in a foam lined rectangular cardboard box with the brand name on it. Soooo... where did you acquire them? What name brand are they? And I am sure they are probably from China? EBay Maybe? Quote Share this post Link to post Share on other sites
ContactCement Report post Posted July 24, 2017 (edited) Here's the link. http://www.ebay.com/itm/Wuta-Leather-Edge-Beveler-Edge-Skiving-Tools-Belt-Makers-High-Carbon-Steel-/152609445287?var=&hash=item23883b55a7:m:mjJUQWMYjVohDQCJcKDwltQ https://en.wikipedia.org/wiki/Carbon_steel Edited July 24, 2017 by ContactCement Quote Share this post Link to post Share on other sites
bikermutt07 Report post Posted July 24, 2017 Yeah, I like Wuta stuff. Haven't tried these yet though. Quote Share this post Link to post Share on other sites
