Members Melonie Posted November 5, 2017 Members Report Posted November 5, 2017 (edited) Pro Edge Skirt Chaser-Drill Burnisher is like new. I bought it just a few months back and used it very lightly but didn't end up needing it. I am selling it for $35 plus $5 for shipping. Has seven grooves, 1" flat, 1/", 3/8", 5/16", 1/4", 1/8", 1/16" rounded grooves with the steel shaft and made from cocobolo wood. Keep in mind that this burnisher is specifically made to be attached to a drill press and the drill press is not included. Edited November 5, 2017 by Melonie
Members cmantz Posted November 5, 2017 Members Report Posted November 5, 2017 I will take it. Can you send me a paypal invoice? Christine Mantz www.tacktemplates.com Specializing in acrylic templates for tack makers **TACK SETS - HALTER SETS - SPECIALTY - DELRIN STAMPS** We also offer custom acrylic templates and laser service on leather blanks
Members LottyAfrica Posted October 22, 2019 Members Report Posted October 22, 2019 Hi there! Was this item sold in the end? Best wishes
wizard of tragacanth Posted October 22, 2019 Report Posted October 22, 2019 (edited) Is anybody on Leatherworker forum making these burnishers now? Or any other sources? nick Oh, never mind, I found it. http://proedgeburnishers.com/drill-burnishers.html Edited October 22, 2019 by wizard of tragacanth Wisdom from an old Missouri farmer, my Grandpa: If it's not sharp, it's not a knife.
Members HCLW Posted November 6, 2019 Members Report Posted November 6, 2019 On 10/22/2019 at 6:40 PM, wizard of tragacanth said: Is anybody on Leatherworker forum making these burnishers now? Or any other sources? nick Oh, never mind, I found it. http://proedgeburnishers.com/drill-burnishers.html I have emailed and called them and no response. Do you know if they are still in business?
Contributing Member JLSleather Posted November 6, 2019 Contributing Member Report Posted November 6, 2019 At the risk of being the jerk (again).. I'll ask HOW you are running these "burnishers"? If you're using a drill press or lathe, isn't it just as easy to chuck on an oak dowel and MAKE the groove or grooves you want? Total cost... about $2 an travel time to local building materials store (Lowe's, Home Depot, Menards, etc). "Observation is 9/10 of the law." IF what you do is something that ANYBODY can do, then don't be surprised when ANYBODY does.
Members Squilchuck Posted November 6, 2019 Members Report Posted November 6, 2019 I just bought something from Pro Edge Burnishers, so they are in business. I ordered on line and got it in a week or so -John
Recommended Posts