filipblaauw Report post Posted January 8, 2018 I am looking at the CS Osborne 158 Oval Drive punch tool for making oval holes in belts. Do any of you have suggestion on which size will be suitable for belts from 1" to 1 1/2"? I have not started making belts yet, so I am grateful for any tips. The avaiable sizes are listed here: https://www.csosborneleathertools.com/product_detail.php?p_id=376 Quote Share this post Link to post Share on other sites
alpha2 Report post Posted January 8, 2018 I use a Craftool #07, 7/32". Quote Share this post Link to post Share on other sites
toe2short Report post Posted January 9, 2018 Weaver has a good one. Quote Share this post Link to post Share on other sites
480volt Report post Posted January 10, 2018 I use an Osborne 147 style #6 oval. The sizes don’t seem to cross over to the 158 type. Don’t think they make them anymore, I got mine from Bruce Johnson. Quote Share this post Link to post Share on other sites
