Molded document sleeve

[farmersracer]

9 hours ago, A6C5O7 said:

How did you install those snaps? Did you do it all by hand or did you use a tool and do you think you would replace snaps with these? 

Hello A6C507

The maps are installed before sewing the parts together. Special tools for these snaps of course. No moving parts in the chrome studs, so I don't thing they ever need replacement. Scovill.com have got studs with thread mounting though, but they will take up too much room inside the bag.

[farmersracer]

9 hours ago, YinTx said:

Cleanly executed.  That looks like really nice leather!  How does it burnish?

YinTx

Thanks YinTx

Sadly the burnish is spreading from the edge to the surface of the leather in an uneven pattern. This is one of the reason I only use wax on the edges. I might try heating the edges on some models in the future.

[ByNelson]

Lovely work, do you buy directly from Tärnsjö Tannery? 

[Basically Bob]

Every aspect of that sleeve looks great!  Thanks for sharing!

[farmersracer]

12 hours ago, ByNelson said:

Lovely work, do you buy directly from Tärnsjö Tannery? 

Thanks ByNelson

Yes I buy directly from Tärnsjö Tannery. They are really good to work with. They have no minimum order and good support.

[Peter Darby]

Beautiful work.   For me the beauty lies in the perfection of the work.  Awesome molding, edges and construction.

[ByNelson]

8 hours ago, farmersracer said:

Thanks ByNelson

Yes I buy directly from Tärnsjö Tannery. They are really good to work with. They have no minimum order and good support.

Okay sidst jeg kiggede kunne jeg ikke se en salgs side, måske du har et link? 

 

[Texson]

Wow, nice work!  The edges are wonderful as they are.  Very clean and neat. 

[Stetson912]

Does the tannery have a website by chance? I thought I found one but it mentioned a 600ft minimum order 

[Fire88]

Those look great!!!