Members Michiel Posted November 20, 2021 Members Report Posted November 20, 2021 Thank you John, this will help improving my self made cam kind regards michiel ps: for who is interested : my machine has the 6 mm stitch but i figured out with a new cam and some small adjustments it should be possible to make 12 mm with 2 or 3 step stitches (i need to replace the feed dogs, needle plate and foot but they are not so expensive since global makes them)
Members Michiel Posted November 20, 2021 Members Report Posted November 20, 2021 i took a better look to your photos: your cam is better than de photos i used till now This really helps, thanks again for your efford!
Recommended Posts