Stetson912 Report post Posted June 26, 2018 Here's a simple collar and leash made from 9/10oz European bridle. It's havanna in color (a deep chocolate brown) brass hardware. Collar is 1 3/4" wide and leash is 1" wide. Thanks for looking. Let me know what you think, and critiques always welcome. Quote Share this post Link to post Share on other sites
garypl Report post Posted June 26, 2018 Looks good Stetson - where do you buy your bridle leather? Gary Quote Share this post Link to post Share on other sites
Stetson912 Report post Posted June 26, 2018 This I got from Roger at rjf leather. Had it a while. It's thicker than I typically get but good for this application. Might get around to making me a belt. Maybe, depends. I happen to be circumferentially challenged hehe. Quote Share this post Link to post Share on other sites
Raksha Report post Posted June 26, 2018 I like it. Clean and simple. Quote Share this post Link to post Share on other sites
Stetson912 Report post Posted June 27, 2018 Thanks raksha. That's what they wanted. It's nice to be able to knock out an easy simple project sometimes Quote Share this post Link to post Share on other sites
mike6642 Report post Posted June 27, 2018 Nice job, my daughter wants one for her dog, that’s my next project, again very well done Quote Share this post Link to post Share on other sites
Stetson912 Report post Posted June 27, 2018 Thanks Mike, if you can do a belt you can do a collar. I'd like to see what you end up making. Quote Share this post Link to post Share on other sites
mike6642 Report post Posted July 4, 2018 Ok,next project and will post Quote Share this post Link to post Share on other sites
