Jump to content

Recommended Posts

  • Members
Posted

Hey Everyone!

Actually working to develop a flat cap rivet as we speak and stumbled on this post!

Have a look at the image below. Let me know your thoughts?!

Thanks.

Hugh

IMG_1116.jpg

Hugh Harriss

www.buckleguy.com

(978) 213-9989

info@buckleguy.com

Suppliers of Brass Hardware, Zippers, Leather, Tools & More

A Family Business Since 1946

Posted
12 hours ago, HWH19 said:

Let me know your thoughts?!

I like the look. I would buy them in chrome, brass and black if they were available.

Kindest regards

Brian

 

"Whether you think you can or whether you think you can't, you are right"  Henry Ford

Machines: Singer 201p, Kennedy,  Singer 31K20, Singer 66K16 ("boat anchor" condition), Protex TY8B Cylinder Arm (Consew 227r copy), Unbranded Walking Foot (Sailrite LSV-1 copy)

  • 1 month later...
  • Members
Posted

 

On 11/7/2018 at 5:55 PM, HWH19 said:

Hey Everyone!

Actually working to develop a flat cap rivet as we speak and stumbled on this post!

Have a look at the image below. Let me know your thoughts?!

Thanks.

Hugh

IMG_1116.jpg

are these solid or normal style where the metal is folded? I want solid so I can cut off the edges and make square. 

maybe you could just make me some square double cap rivets?? 

  • Members
Posted
On 8/15/2018 at 1:38 PM, fredk said:

thanks do you think I could like rivet them over some how or use a post of a double cap rivet to do the backside? I've tested Chicago screw in my application and they loosen over time and fall out from the rough conditions 

  • Members
Posted (edited)
  • 1 month later...
  • Members
Posted
On 1/2/2019 at 6:23 PM, Treesner said:

I took a closer look and you can see the round rivet under a square mask. Possible maybe to swap some masks to the other side?

  • Members
Posted
3 hours ago, GeneH said:

I took a closer look and you can see the round rivet under a square mask. Possible maybe to swap some masks to the other side?

good eye I'll try that out 

  • Members
Posted
On 3/1/2019 at 5:24 PM, Mattsbagger said:

If you don’t use the setter and domed anvil just a flat anvil and flat faced hammer you can get flat double cap rivets.

thanks mainly I was trying to find solid double cap rivets so I could cut them to be square 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...