stiffbackjack Report post Posted August 30, 2018 I need to find a handgun for a s&w 38 special ctg with a 6" barrel of a handgun that can be used in it's place.Thanks for your help.Jack Quote Share this post Link to post Share on other sites
koreric75 Report post Posted August 30, 2018 I got a s&w k frame 4" barrel from knife kits, can't remember if they had the 6" barrel. Quote Share this post Link to post Share on other sites
chiefjason Report post Posted August 31, 2018 Watch the K frame molds. They have the exposed ejector rods and not the underlugs on most of them. FWIW, I usually have to build up a shorter barrel to make 6" barrel holsters. You don't need a lot of strength, just something to take up the space to mold it. Quote Share this post Link to post Share on other sites
koreric75 Report post Posted August 31, 2018 2 minutes ago, chiefjason said: Watch the K frame molds. They have the exposed ejector rods and not the underlugs on most of them. FWIW, I usually have to build up a shorter barrel to make 6" barrel holsters. You don't need a lot of strength, just something to take up the space to mold it. True, I also thought I was getting a mold for 357, but got the mold for .38, felt quite a bit more narrow but since I wasn't wet forming I was about to make allowance for it Quote Share this post Link to post Share on other sites
