Tandy swivel knives

[immiketoo]

On September 29, 2018 at 4:13 PM, CutThumb said:

Hi, just thinking about buying my first swivel knife, and have a limited budget of around £30 ($40]. There are some Tandy Ergo knives on eBay, new but reduced from £50. Is this is a decent knife? And is it easy to buy blades for? I’m coming at this from a place of absolute ignorance! Don’t know if blades are interchangeable or proprietary.  

Havent seen any second hand leatherwork gear for sale in the UK...

If you're on a budget, these knives by Rickert are very nice, although the blades need a little work out of the box.  They are adjustable and there are a variety of blades available for them.

On October 1, 2018 at 1:10 AM, NVLeatherWorx said:

I prefer what are called Hollow Ground as they have less thickness to them and the concave sections reduce the drag through the leather.

NV, I don't want to start an argument, but this is generally not true.  Only the tip of the blade goes into the leather and the hollow part rarely, if ever,  gets into the leather.  Maybe on a long straight border cut, but otherwise, its just the tip.  Blade condition and preparation (Mirror and stropping) have far more effect on drag in leather than a hollow ground blade.  Bobby Park and I had this discussion about Bob Beard's hollow ground blades and he generally feels its just a comfortable place to put your pinky finger.  

On October 1, 2018 at 12:40 AM, CutThumb said:

Thanks. Are there superior makes of blades I should look out for? 

Yes.  Blades of superior manufacture are generally the cost of an inexpensive knife WITH a blade.  Leather Wranglers, Peter Main, Barry King and Bob Beard all offer blades of superior quality.  The advantages are geometry that is better and better steel, plus a blade that is ready out of the box.

On October 1, 2018 at 3:32 AM, battlemunky said:

Also, you may want to go with a less steep angled grind to begin with, it'll help keep you from going too deep when you start cutting. There are a few different trains of thought on carving and one of them is to "cut less/bevel more" by our own @immiketoo. Now, Mike is ridiculously talented so there is a ton of merit to this philosophy. Trying to keep from cutting too deep and exposing core leather is what the gist is and then using bevelers and modeling spoons more. Give the below video a good view and see if that appeals to you and then think about the blade choice.

 

Thanks, Munky!  I prefer the low angle blade for many reasons, although its more on account of my carving style and the fact that I don't do a lot of floral.  I still use regular blades for floral and deco cuts, and for other assorted carving projects.

[ABHandmade]

Mike (@immiketoo), thanks for coming back to the forum. Without you and your really useful comments and advice, something was missing (at least for me).

[immiketoo]

Coming back?  I didn't go anywhere

 

[ABHandmade]

9 minutes ago, immiketoo said:

Coming back?  I didn't go anywhere

 

I am glad to see you in good humor and good mood

PS. I apologize for possibly excessive familiarity.

Edited October 3, 2018 by ABHandmade

[immiketoo]

Always!

[CutThumb]

On 03/10/2018 at 11:47 AM, immiketoo said:

If you're on a budget, these knives by Rickert are very nice, although the blades need a little work out of the box.  They are adjustable and there are a variety of blades available for them.

NV, I don't want to start an argument, but this is generally not true.  Only the tip of the blade goes into the leather and the hollow part rarely, if ever,  gets into the leather.  Maybe on a long straight border cut, but otherwise, its just the tip.  Blade condition and preparation (Mirror and stropping) have far more effect on drag in leather than a hollow ground blade.  Bobby Park and I had this discussion about Bob Beard's hollow ground blades and he generally feels its just a comfortable place to put your pinky finger.  

Yes.  Blades of superior manufacture are generally the cost of an inexpensive knife WITH a blade.  Leather Wranglers, Peter Main, Barry King and Bob Beard all offer blades of superior quality.  The advantages are geometry that is better and better steel, plus a blade that is ready out of the box.

Thanks, Munky!  I prefer the low angle blade for many reasons, although its more on account of my carving style and the fact that I don't do a lot of floral.  I still use regular blades for floral and deco cuts, and for other assorted carving projects.

Thanks, their site is great.