libbysstitches Report post Posted October 30, 2018 Riddle me this. Outer foot doesn't mark vinyl except for a slight indentation that disappears, But leaves a shiny mark on woven fabric...It wasn't doing it before. It has just started doing it. ANy idea what I might have done or how to remedy that, please? Quote Share this post Link to post Share on other sites
Constabulary Report post Posted October 30, 2018 1st guess - I´d lower the foot pressure Quote Share this post Link to post Share on other sites
libbysstitches Report post Posted October 30, 2018 That's what I thought, too but it is as low as it can go. It is just the outer foot on the left. Quote Share this post Link to post Share on other sites
Wizcrafts Report post Posted October 30, 2018 It could be oil on the bottom of the foot that is staining cloth, but not vinyl. Wipe the feet and needle (with power off) to remove excess oil before sewing. Oil in the head flows downward onto the three shafts coming out of the bottom of the head. Quote Share this post Link to post Share on other sites
dikman Report post Posted October 30, 2018 Is it a new or old model 335? And have you adjusted/changed anything recently? Quote Share this post Link to post Share on other sites
