Members Alexis1234 Posted January 4, 2019 Members Report Posted January 4, 2019 This is my 2nd attempt at harness. Lots of handstitching including all of the keepers. It was a learning experience for sure. I made plenty of mistakes, but I'm sure the next one will turn out better. Quote
Members Big Sioux Saddlery Posted January 4, 2019 Members Report Posted January 4, 2019 That style of harness is a lot of fiddly, time consuming work. I've known people who have been "building harness" for decades and still can't do that level of work. Very nice job. Quote
Contributing Member Samalan Posted January 4, 2019 Contributing Member Report Posted January 4, 2019 Wow That looks like a lot of work ! beautiful job, how long did that take, you folks that do that kind of work are amazing really nice work. Quote
Members Alexis1234 Posted January 4, 2019 Author Members Report Posted January 4, 2019 Big Sioux, thank you- I value your opinion and advice greatly. I had the majority of this harness done months ago...The saddle was very difficult. I kept making mistakes and wanted to throw it in the boiler on numerous occasions. Quote
Members Alexis1234 Posted January 4, 2019 Author Members Report Posted January 4, 2019 9 minutes ago, Samalan said: Wow That looks like a lot of work ! beautiful job, how long did that take, you folks that do that kind of work are amazing really nice work. Thank you! It was alot of work. I worked on this off and on for about 6 months. The major hold up was the saddle... I had to design everything from the ground up including the tree, skirts, etc because I don't have access to any patterns and very limited information out there.. Lots of trial and error. Quote
Members Smartee Posted January 4, 2019 Members Report Posted January 4, 2019 Beautiful job! My pony would look great in it! Quote
Members Boondoggle Posted January 4, 2019 Members Report Posted January 4, 2019 VERY nice... I wish the pictures were bigger! Quote
Members Alexis1234 Posted January 4, 2019 Author Members Report Posted January 4, 2019 2 minutes ago, Boondoggle said: VERY nice... I wish the pictures were bigger! Me too. Is there any way to do that? These were taken on a cell phone and soo many little details are lost in the pics 31 minutes ago, Smartee said: Beautiful job! My pony would look great in it! Thank you! Quote
Members Big Sioux Saddlery Posted January 5, 2019 Members Report Posted January 5, 2019 5 hours ago, Alexis1234 said: ...The saddle was very difficult. Usually the worst part, especially on the higher end type harness. Just curious if you still have your Landis #1, or if you stitched this on a different machine. It doesn't look like a set-up foot was used. Quote
Members Alexis1234 Posted January 5, 2019 Author Members Report Posted January 5, 2019 2 hours ago, Big Sioux Saddlery said: Usually the worst part, especially on the higher end type harness. Just curious if you still have your Landis #1, or if you stitched this on a different machine. It doesn't look like a set-up foot was used. I sold my landis 1 last spring.This was sewn on a cobra class 4. Quote
Members JazzBass Posted January 5, 2019 Members Report Posted January 5, 2019 Just one question - are you married?? LOL Beautiful work. All the time you spent on that rig, shows! It takes some serious skills to even consider such a project. 2nd attempt? Wow. Quote
Members Alexis1234 Posted January 5, 2019 Author Members Report Posted January 5, 2019 15 minutes ago, JazzBass said: Just one question - are you married?? LOL Beautiful work. All the time you spent on that rig, shows! It takes some serious skills to even consider such a project. 2nd attempt? Wow. Yes, I am married and thank you- it was alot of work! Quote
Members awharness Posted April 8, 2019 Members Report Posted April 8, 2019 Looks really nice! I’m assuming you cut all the curves free hand? Raised the patent on the drops and the breaching top? Did you use tufting on the saddle? You didn’t cut any corners on this one! Where are you getting your patent? -Andrew Quote
Members Alexis1234 Posted April 8, 2019 Author Members Report Posted April 8, 2019 Thank you! Yes, all the curves were free cut- I don't have any clicker dies. Patent overlays on hip and shoulder strap, drops are raised. Unfortunately, saddle is not tufted. Its lined and padded. Originally, I had made up a tufted pad panel and planned on lacing it on but I had a heck of a time getting the panel to line up/ sized correctly. Something to work on for the next one. I get my patent from Weaver. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.