Members DavidMillsSaddlery Posted May 31, 2019 Members Report Posted May 31, 2019 (edited) Curious if I’ve got this threaded right? Manual give directions with part numbers... kinda hard to follow? Edited May 31, 2019 by turbotexas Quote
Members DavidMillsSaddlery Posted June 3, 2019 Author Members Report Posted June 3, 2019 surely there’s some Landis Guys here? Quote
Members DavidMillsSaddlery Posted June 3, 2019 Author Members Report Posted June 3, 2019 4 minutes ago, Wizcrafts said: Sorry. Not me. You’re the guy for the Union I have lol Quote
CowboyBob Posted June 3, 2019 Report Posted June 3, 2019 Don't forget back when these machines were made they never knew about this new-fangled nylon twisted thread,so I think you have so much pressure @ that point it's pinching the thread too much,try a lighter spring.I've ran them with nylon & never had any trouble. Quote
Members DavidMillsSaddlery Posted June 3, 2019 Author Members Report Posted June 3, 2019 4 hours ago, CowboyBob said: Don't forget back when these machines were made they never knew about this new-fangled nylon twisted thread,so I think you have so much pressure @ that point it's pinching the thread too much,try a lighter spring.I've ran them with nylon & never had any trouble. True, and I’ve played with the adjusting of that spring, but then the thread doesn’t come through the leather bottom like it should? This is an older polyester spool (5-6 years old) I got from Campbell. A 207... the 346 never did this? Quote
Members DavidMillsSaddlery Posted June 3, 2019 Author Members Report Posted June 3, 2019 might have figured it out? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.