Northmount Posted August 1, 2019 Report Posted August 1, 2019 On 7/30/2019 at 1:44 PM, Chris59 said: My picture is more than 1.46mb Resize the photo. On 7/30/2019 at 2:13 PM, Chris59 said: Living in Montreal, Canada Should add your location to your profile. Could have put you in touch with a dealer much sooner. Good luck with your machine. Tom Quote
Members Chris59 Posted August 1, 2019 Author Members Report Posted August 1, 2019 (edited) Tanks. I update my location, and learn how to shrink pictures. the piece tied up with 2 screws look bend. Wizcraft, i can read your instructions, but i have no clue of the parts your naming. Is there a manual with designs and label? Edited August 1, 2019 by Chris59 Quote
Northmount Posted August 1, 2019 Report Posted August 1, 2019 11 hours ago, Chris59 said: the piece tied up with 2 screws look bend The top of this article shows the basic parts of a simple sewing machine. Some instruction and parts manuals. The instruction manuals show how to reset the clutch. 111W156manual.pdf 111g156.pdf 111w156.pdf The 111W156 manual seems to be a better copy. W and G signify the locations the machines were built at. Thought this little GIF might help you understand a little how the machine works. Tom Quote
Members shoepatcher Posted August 9, 2019 Members Report Posted August 9, 2019 Machine not threaded correctly. On the tension discs, do not go around the little pin. That pin is for locating the tension discs in the correct spot. glenn Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.