Members Chris59 Posted July 30, 2019 Members Report Posted July 30, 2019 Hi, Just got an old 111g156 machine. Its is not sewing properly. Does someone has a manual ? Don't know the name of the part i am looking for. First time user of this site/ community. You can see on the picture where it is rubbing , but can't load it Quote
Members Yetibelle Posted July 30, 2019 Members Report Posted July 30, 2019 the Forum makes it a little tricky to upload the manual, if you Google - Singer 111g156 pdf - the parts manual comes right up as the first hit. Henderson is also a great place to find manuals. https://www.hendersonsewing.com/manual.asp?page=42 Quote One day I hope to learn how to sew..... Singer 111W155 - Singer 29-4 - Singer 78-1 - Singer 7-31 - Singer 109w100 - Singer 46W-SV-16 - Adler 20-19 - Cowboy CB-4500
Members Chris59 Posted July 30, 2019 Author Members Report Posted July 30, 2019 Thank you. It is great, but i need design to identify the part. I have no knowledge on sewing machine. Quote
Members Yetibelle Posted July 30, 2019 Members Report Posted July 30, 2019 I don't think your picture got added, can you try and add again. Quote One day I hope to learn how to sew..... Singer 111W155 - Singer 29-4 - Singer 78-1 - Singer 7-31 - Singer 109w100 - Singer 46W-SV-16 - Adler 20-19 - Cowboy CB-4500
Members Yetibelle Posted July 30, 2019 Members Report Posted July 30, 2019 Here is a video of the 111g156 running, do you see the part in the video? or is it not part of the needle and foot area? https://www.youtube.com/watch?v=R8zxFHHChlo Quote One day I hope to learn how to sew..... Singer 111W155 - Singer 29-4 - Singer 78-1 - Singer 7-31 - Singer 109w100 - Singer 46W-SV-16 - Adler 20-19 - Cowboy CB-4500
Members Chris59 Posted July 30, 2019 Author Members Report Posted July 30, 2019 It is around the casing of the thread, under and inside. I had to remove the foot to take it out, the casing who is screw to a shaft The needle is rubbing on the outside part and make the stitches skip My picture is more than 1.46mb Quote
Members Yetibelle Posted July 30, 2019 Members Report Posted July 30, 2019 Is it the correct needle for the machine? Is it a new needle, sometimes the needles get bent slightly and that's all it take to rub and skip stiches this is a good video showing how the needle passes down and meets the hook at the right distance and time, to make a stich. This machine he is using is similar to yours. https://www.youtube.com/watch?v=Og1hM8iS22Q Quote One day I hope to learn how to sew..... Singer 111W155 - Singer 29-4 - Singer 78-1 - Singer 7-31 - Singer 109w100 - Singer 46W-SV-16 - Adler 20-19 - Cowboy CB-4500
Members Chris59 Posted July 30, 2019 Author Members Report Posted July 30, 2019 It is where the bobbin is insert. The part under the hook ,who grab the thread. It look bend. It is tied up by 2 screws I food the info looking at other sewing machine. Somebody know where i can find pieces? Living in Montreal, Canada Quote
Members Chris59 Posted July 30, 2019 Author Members Report Posted July 30, 2019 (edited) I put apart the machine. I had with the machine brand knew original needle. It was working very well at the beginning. Thread go stock very badly under. Then it stop sewing properly The video is helpful to see how it should work. Thanks. Edited July 30, 2019 by Chris59 Quote
Moderator Wizcrafts Posted July 31, 2019 Moderator Report Posted July 31, 2019 Raphael Sewing Machines, aka Techsew, is located in Montreal. They are a major dealer of industrial sewing machines, parts and repairs. Their address is: 155, rue de Port-Royal O, Montréal, QC H3L 2B3. Their local phone number is listed as: 514-270-1537. As for the machine not sewing after a thread jam, it may be because the safety clutch popped when the hook got jammed with thread. Remove the top thread, then clear out all thread remnants from the hook and bobbin area, oil the hook well, them push down the button on the flat bed as you turn the handwheel away from you. The clutch should pop back into place and restore normal timing and operation. Quote Posted IMHO, by Wiz My current crop of sewing machines: Cowboy CB4500, Singer 107w3, Singer 139w109, Singer 168G101, Singer 29k71, Singer 31-15, Singer 111w103, Singer 211G156, Adler 30-7 on power stand, Techsew 2700, Fortuna power skiver and a Pfaff 4 thread 2 needle serger.
Northmount Posted August 1, 2019 Report Posted August 1, 2019 On 7/30/2019 at 1:44 PM, Chris59 said: My picture is more than 1.46mb Resize the photo. On 7/30/2019 at 2:13 PM, Chris59 said: Living in Montreal, Canada Should add your location to your profile. Could have put you in touch with a dealer much sooner. Good luck with your machine. Tom Quote
Members Chris59 Posted August 1, 2019 Author Members Report Posted August 1, 2019 (edited) Tanks. I update my location, and learn how to shrink pictures. the piece tied up with 2 screws look bend. Wizcraft, i can read your instructions, but i have no clue of the parts your naming. Is there a manual with designs and label? Edited August 1, 2019 by Chris59 Quote
Northmount Posted August 1, 2019 Report Posted August 1, 2019 11 hours ago, Chris59 said: the piece tied up with 2 screws look bend The top of this article shows the basic parts of a simple sewing machine. Some instruction and parts manuals. The instruction manuals show how to reset the clutch. 111W156manual.pdf 111g156.pdf 111w156.pdf The 111W156 manual seems to be a better copy. W and G signify the locations the machines were built at. Thought this little GIF might help you understand a little how the machine works. Tom Quote
Members shoepatcher Posted August 9, 2019 Members Report Posted August 9, 2019 Machine not threaded correctly. On the tension discs, do not go around the little pin. That pin is for locating the tension discs in the correct spot. glenn Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.