Ardunpinto Report post Posted August 25, 2019 (edited) I just purchased this glaco long arm machine. I can't find any info on them. It is similar to my other industrial machines. Most of the adjustments are common to my consew and juki. What I am trying to figure out is what machine is similar on parts. I figured it was a re-branded and I can't really find a similar machine with a 30" bed. My main issue is the stitch length. Even on its longest setting it's stitch length is about the same as my phaff's shortest. Any insite whoul be great on adjustments. I only have this one picture and can get more tomorrow at the shop. Thanks in advance Edited August 25, 2019 by Ardunpinto Add pic Quote Share this post Link to post Share on other sites
DrmCa Report post Posted August 26, 2019 17 hours ago, Ardunpinto said: My main issue is the stitch length. Even on its longest setting it's stitch length is about the same as my phaff's shortest. That is why they sold it! It is similar to Consew 206RBL-30. Quote Share this post Link to post Share on other sites
shoepatcher Report post Posted August 26, 2019 The feed cam is off. That machine should sew about a 7-8mm stitch length. glenn Quote Share this post Link to post Share on other sites
Gregg From Keystone Sewing Report post Posted August 27, 2019 On 8/26/2019 at 11:57 AM, shoepatcher said: The feed cam is off. That machine should sew about a 7-8mm stitch length. glenn Exactly correct, 3-1/2" or 7.25mm. Quote Share this post Link to post Share on other sites
