Frederick Report post Posted September 27, 2019 Hi folks, I live in the uk and own a 5” and 6” (this refers to the actual cutting widths) Dixon bench splitter both of which are in very good condition. My 5” blade is razor sharp however I need a replacement blade for the 6” splitter either a new/old stock or a blade made to suit. My intention is to sell the 5”splitter but only if I can get a blade for the 6”. Any help or ideas on how I can get a blade would be most welcome. thanks John Share this post Link to post Share on other sites
Webicons Report post Posted October 22, 2019 Maybe give Pilgrim a try. They shipped a wicked sharp replacement blade for my American crank splitter at a very reasonable price. http://www.pilgrimshoemachine.com/ If not then perhaps talk to a local machine shop. Good luck! Share this post Link to post Share on other sites
philg9 Report post Posted April 2, 2020 On 9/27/2019 at 12:18 PM, Frederick said: Hi folks, I live in the uk and own a 5” and 6” (this refers to the actual cutting widths) Dixon bench splitter both of which are in very good condition. My 5” blade is razor sharp however I need a replacement blade for the 6” splitter either a new/old stock or a blade made to suit. My intention is to sell the 5”splitter but only if I can get a blade for the 6”. Any help or ideas on how I can get a blade would be most welcome. thanks John Just read this post as am a new member here, I'm a long term harness maker in the UK, did you manage to source a blade for your 6 inch splitter. Share this post Link to post Share on other sites
fivewayswelshcobs Report post Posted April 2, 2020 Try Dave Budd, saw him at Torm last year and kept his card (www.davebudd.com). UK based and the knives looked useful. Share this post Link to post Share on other sites
aaronthearcher Report post Posted July 7, 2020 I have a complete 8 in if you were interested Share this post Link to post Share on other sites
