Members EmilK Posted June 6, 2020 Author Members Report Posted June 6, 2020 Hello Evilla! Is it too late to post video, since you wrote me 6 months ago. And if is not to late I still have to make video. Emil Quote
CowboyBob Posted June 6, 2020 Report Posted June 6, 2020 Be careful when you oil that you don't get oil in the groove that grabs the wheel or it could cause it to slip shortening your stitch length. Quote Bob Kovar Toledo Industrial Sewing Machine Sales Ltd. 3631 Marine Rd Toledo,Ohio 43609 1-866-362-7397
Members Evilla Posted June 13, 2020 Members Report Posted June 13, 2020 On 6/6/2020 at 7:41 AM, EmilK said: Hello Evilla! Is it too late to post video, since you wrote me 6 months ago. And if is not to late I still have to make video. Emil Hello, No it is not too late. I would appreciate a video if you could. Also, do you know where to obtain parts for this machine? Thank you Quote
Members EmilK Posted June 16, 2020 Author Members Report Posted June 16, 2020 On 6/14/2020 at 1:09 AM, Evilla said: Hello, No it is not too late. I would appreciate a video if you could. Also, do you know where to obtain parts for this machine? Thank you Some hints for disassemble singer 18-3 sewing machine you can find in attachment. Till next time. Emil HINTS FOR DISASSEMBLE SINGER 18-3 SEWING MACHINE.pdf Quote
Members Sandor Posted December 27, 2020 Members Report Posted December 27, 2020 I had the same problem yesterday. It was rhe spring under the machine arm. It wasn't tight enough. Quote
Members falseyellow Posted January 18, 2021 Members Report Posted January 18, 2021 I have disassembled singer17-1 and 18-2. According to my analysis, your problem should be the worn part. You can try to weld the notch and then polish it to restore it. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.