Nlfrchief Report post Posted January 13, 2020 I got a request to make a holster "just like this one", most of the holster could be a model for the Al Stohlman book except for the lacing. Looking at the trigger area, the leather is joined at a 90 deg angle. The only way I can see to do that is to do a normal lacing stitch but keep it a little loose and then rotate the leather to the 90 deg angle and then tighten up the lacing. The entire seam isn't so extreme, but it's not flat. Any suggestions? This is also 1/4" lace so i'm going to have to make a 1/4" thonging awl since I can't find one. Quote Share this post Link to post Share on other sites
Dwight Report post Posted January 13, 2020 Can we see the rest of the holster, . . . might make it easier to understand. May God bless, Dwight Quote Share this post Link to post Share on other sites
JLSleather Report post Posted January 13, 2020 By the way it's cut, I'd say it was made just as you said.... somebody laced it "traditionally", and over time it "rotated" out. Quote Share this post Link to post Share on other sites
Nlfrchief Report post Posted January 14, 2020 Here are some more pictures. Quote Share this post Link to post Share on other sites
Nlfrchief Report post Posted January 14, 2020 Thanks for the reply JLS, I was wondering if that was the case. Quote Share this post Link to post Share on other sites
JLSleather Report post Posted January 14, 2020 1 hour ago, Nlfrchief said: Thanks for the reply JLS, I was wondering if that was the case. Now that i see the pics, I'm even more sure that's all it is. Line up edges, lace, form, ... dunn. Quote Share this post Link to post Share on other sites
Nlfrchief Report post Posted January 14, 2020 Thanks, I think I'll do that. Quote Share this post Link to post Share on other sites
