Members Dan Hammons Posted September 5, 2007 Members Report Posted September 5, 2007 Hi All, Two more Flacks I just finished up. Thanks Beez the tool number I used to mat these is E294 Quote If you haven't got time to do it RIGHT How are you going to find the time to do it OVER ! Dan Hammons http://highcountryleatherart.com/
Contributing Member wolvenstien Posted September 5, 2007 Contributing Member Report Posted September 5, 2007 In the matting outside of the carving.... what did you use the highlight the deeper points to looks dark/blackish, with the higher parts looking brown? and how did you apply it? Quote "The miracle is not how two adults can create a child, the phenomenon is how quickly a child can create two adults." -- VYBE Her: Hit Me Him: Do you want me to use the knife? Her: No, When you hit with a knife, that's STABBING!
Members Dan Hammons Posted September 5, 2007 Author Members Report Posted September 5, 2007 Hey Wolve , For the back ground I used tandy light brown dye reduced 50% on both flasks and then on the eagle I used tandy red reduced 50% over the light brown. After the dyes were dry I appliedTandy Antique Tan to the Deer and Mahogany on the eagle. I applied these with a dabber in a circlar motion untill color was even and the antique started to get tacky. Useing a clean piece of wool I started buffing lightly to get antique off the high points of textured leather. How much antique is left in depressions depends on the amount of pressure you use while buffing. you have about 15 min to do this .....anything longer than that the antique is hard to get off. Quote If you haven't got time to do it RIGHT How are you going to find the time to do it OVER ! Dan Hammons http://highcountryleatherart.com/
Ambassador freak Posted September 8, 2007 Ambassador Report Posted September 8, 2007 I could of swore i posted on these. But, i start a reply all the time then get called away from the pc or get a phone call. Anyway, I really like these two. I like the other ones but i think these have a few more of the small details . I think that adding the extra to the oval frame part is a huge diff to me. Nice work Dan ! Quote It takes more then one freak to have a true freakshow. So take a seat , the show is about to start. Check out the freakSHOW
Mike Craw Posted September 8, 2007 Report Posted September 8, 2007 Beautiful work Dan! I especially like the job you did coloring them. I enjoy the carving and tooling, but when it comes to putting on a finish, I think I'd rather have root-canal. Yours came out great. How did you get the leather so tight over ti flask. Do you dampen it and shrinki it on, or lace the back? Mike Quote My choice early in life was either to be a piano-player in a whorehouse or a politician. And to tell the truth, there's hardly any difference. Harry S. Truman
Roger Posted September 8, 2007 Report Posted September 8, 2007 very nice dan! once again i like your color work!! Quote
Members Dan Hammons Posted September 8, 2007 Author Members Report Posted September 8, 2007 (edited) Beautiful work Dan! How did you get the leather so tight over ti flask. Do you dampen it and shrinki it on, or lace the back? Thanks Mike, Since the others are gone I'll show you the back of one I just finished. I sew the cover first and then slip it over the Flask . 81/2 inches works well with these 8oz flasks although I have had to dampen a couple of them. when the cover is in place I use Barge Cement to get the cover to conform to the curve of the Flask on the back. Edited September 8, 2007 by Dan Hammons Quote If you haven't got time to do it RIGHT How are you going to find the time to do it OVER ! Dan Hammons http://highcountryleatherart.com/
Mike Craw Posted September 9, 2007 Report Posted September 9, 2007 Very creative! And, thanks for not showing everybody else... Mike Quote My choice early in life was either to be a piano-player in a whorehouse or a politician. And to tell the truth, there's hardly any difference. Harry S. Truman
Members Dan Hammons Posted September 9, 2007 Author Members Report Posted September 9, 2007 Mike , The other Flasks are gone lol Quote If you haven't got time to do it RIGHT How are you going to find the time to do it OVER ! Dan Hammons http://highcountryleatherart.com/
Mike Craw Posted September 9, 2007 Report Posted September 9, 2007 It was too good to pass up... Quote My choice early in life was either to be a piano-player in a whorehouse or a politician. And to tell the truth, there's hardly any difference. Harry S. Truman
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.