Bert51 Report post Posted March 25, 2020 Can anyone tell me were I can get parts for my 29K58 in Australia or do I have to order from another country? I have been lucky, the machine appears to be in better condition then I thought when I purchased it. At the moment I only need 2 machine mounting screws Part #50632 and screws draw runners. I do not know the number for the draw runners (bracket). Thanks, Bert. Quote Share this post Link to post Share on other sites
Constabulary Report post Posted March 25, 2020 (edited) cant find the mounting screw 50632 in the parts list. Is it for mounting the head to the casting or the casting to the treadle base? Do you still have the drawer? I`m not sure but I think Singer used different drawers & brackets. Could be that I have a drawer bracket and screws. Edited March 25, 2020 by Constabulary Quote Share this post Link to post Share on other sites
RockyAussie Report post Posted March 25, 2020 second column down and 4 across? https://www.sewingpartsonline.com/singer-14u595-sewing-machine-parts.aspx?sort.ss_cat_sort=desc&index=1 some more info here may be of help.https://leatherworker.net/forum/topic/73822-parts-for-singer-29-4-patching-machine/ Quote Share this post Link to post Share on other sites
Bert51 Report post Posted March 25, 2020 @Constabulary Yes, it's the screw need to attach it to the treadle base, I thought it was #118, then I read here, it was a #128, then I read the new number was 50632, no matter what the number is I only have 2 screws to hold my machine to the treadle base. I have just made a new draw and runner from the one that was on the base, but it was only held with 3 screws. @RockyAussie I thought I would try to get them in Australia before I order from other suppliers. Been to a couple places locally can not find any thing close, one bolt place told me to re-tap them to a UNF size, real helpful he was. Bert. Quote Share this post Link to post Share on other sites
Bert51 Report post Posted March 25, 2020 Sorry, it appears the correct number for the Machine Screw for fastening machine to stand is #50616E . Thanks, Bert. Quote Share this post Link to post Share on other sites
shoepatcher Report post Posted March 26, 2020 Bert, I have the screws for mounting the head to the stand and the runners for the drawer. I also had the drawers reproduced by the Amish with dovetail corners. Better than the original. Unfortunately, I am in the States. Drawers are $22.00, screws are $2.50 each, drawer slides are $10.00/pair. all funds in US dollars. Let me know what if anything you want and and I can check shipping prices. glenn Quote Share this post Link to post Share on other sites
Bert51 Report post Posted March 27, 2020 (edited) Thank you Glen. I think have found a part number for the draw runner screw, it looks like #122. Edited March 27, 2020 by Bert51 missing word Quote Share this post Link to post Share on other sites
