211W155 Is this part supposed to move

[TomWisc]

Thanks Wiz! That sounds like a good idea especially with the bulky material I will be working on.

[ASAuLTCases]

it fits in a slot in the footplate and stops going round, unless the hook is to low or the plate is bent upwards, i have just got a 211g166 a few weeks ago and hade to set it up,  download a few manuals because some explain bits better and even mention things others don't, i think the best was for the model you have, but make sure you read and understand what it says because it will save a lot of time and confusion especialy if bits are missing and set up wrong believe me,  

[Rtilley22]

Help. I have a Singer 211W155 and had to pull the bobbin case to remove jammed thread beneath.  I have managed to loose one of the tiny gib screws! Any part # or resource would be greatly appreciated!                                                                                                                 Ron T.

[nylonRigging]

3 hours ago, Rtilley22 said:

Help. I have a Singer 211W155 and had to pull the bobbin case to remove jammed thread beneath.  I have managed to loose one of the tiny gib screws! Any part # or resource would be greatly appreciated!                                                                                                                 Ron T.

Those screws are tiny...LOL . If can't round one up . I got a screw can mail you.

I wont miss a screw. I replaced both bobbin assembly on my old double needle singer about dozen years ago, and threw the old in a box just for that reason of loosing or breaking...etc. 'cheep insurance'  Robbing parts off the old trash.

.