Members battlemunky Posted June 28, 2020 Members Report Posted June 28, 2020 On 6/27/2020 at 1:14 PM, ZigZag said: I’ve used copper for years, this was the first time I’ve used brass and I was wondering what to expect, and as you say a tad harder to cut and you need to be a smidge harder with the hammer, but really not a whole lot different. I’ve mixed brass rivets with copper burrs and it looks really good. Yep, I've mixed them too. It gives it a nice contrast depending on the item but they will corrode a bit worse faster but they do look really good. Quote
Members DanC Posted August 18, 2020 Members Report Posted August 18, 2020 Very nicely done. Have 1 suggestion: Put a cutout at the top for the marlinspike. It will make it much easier to pull out, especially when you need it and your hands are wet. It is quite long, so it won't accidentally come out. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.