Guest Bananaman Posted June 30, 2020 Report Posted June 30, 2020 Hi I am new in leather work and I just purchased Adler 268-273 dual needle post bed . It is very old but still going. Clutch motor will be swapped for Servo for sure. I will use it as double and a single needle setup but I have problem to find accessories supplier in Australia or anywhere else. I am after presser foots for single needle setup as matter of urgency. Any suggestions !
Moderator Wizcrafts Posted July 1, 2020 Moderator Report Posted July 1, 2020 You will probably get more and better answers in our Leather Sewing Machines forum, but you would have to first become a member. It only takes a few minutes and costs nothing. We have several long time members in Australia. All posts and replies in this Help Wanted section have to wait for approval by a moderator before they can be seen. You also don't have access to our private messages system, which members do enjoy. Posted IMHO, by Wiz My current crop of sewing machines: Cowboy CB4500, Singer 107w3, Singer 139w109, Singer 168G101, Singer 29k71, Singer 31-15, Singer 111w103, Singer 211G156, Adler 30-7 on power stand, Techsew 2700, Fortuna power skiver and a Pfaff 4 thread 2 needle serger.
Members Bananaman Posted July 1, 2020 Members Report Posted July 1, 2020 13 hours ago, Wizcrafts said: You will probably get more and better answers in our Leather Sewing Machines forum, but you would have to first become a member. It only takes a few minutes and costs nothing. We have several long time members in Australia. All posts and replies in this Help Wanted section have to wait for approval by a moderator before they can be seen. You also don't have access to our private messages system, which members do enjoy. cheers , registered thank you
Recommended Posts